I How To Check Program Times - Sanyo SPW-CR365GXH56 Technical Data Manual

5. Schedule Timer

I How to Check Program Times

You can check the programmed times for each group and day of the week.
STEP 1 Press the GROUP button and select a group whose
time you want to check.
NOTE
• Group selection is disabled depending on
installation conditions. If so, proceed to the next
step.
STEP 2 Press the DAY button.
•
When the DAY button is pressed the first time,
tomorrow's day of the week starts blinking and the
3
program settings for tomorrow are displayed.
• Every time the DAY button is pressed, the program
settings change in order of the days of the week.
• Pressing the GROUP button displays the program
settings of another group on that same day.
STEP 3 End checking.
Press the CLEAR button. The normal display
•
returns.
NOTE
Holding down the CANCEL button for more than 2
•
seconds also returns the normal display.
Control of Mini ECO-i SYSTEM
3 - 68