Heirloom Buttonhole
Stitch counter Buttonhole
Buttonhole foot no. 3a
Heirloom buttonhole no. 63
programming buttonholes
⦁
1
sew first bead forward
⦁
stop the sewing computer
⦁
press «Quick reverse»-button
►
«auto» and the programmed length (in mm) appears in the Display
►
1
the buttonhole length is programmed
The sewing computer sews the following automatically:
2 the round part
3 the second bead in reverse
4 the bartack and the securing stitches
►
the sewing computer stops and returns automatically to buttonhole
begin
2
3
4
auto buttonhole
►
all subsequent buttonholes will be sewn to exactly the same length
(no need to press «Quick reverse»-button)
⦁
the programmed buttonholes can be saved in the long-term memory
(see page 92)
⦁
press «clr»-button
►
the programmed settings are cleared
⦁
touch «i»-icon
⦁
touch «REC 123»-icon
Buttonhole foot no. 3c (optional accessory)
all buttonhole types
programming buttonholes
1
⦁
sew first bead forward
⦁
stop the sewing computer
⦁
press «Quick reverse»-button
1
2 sew lower bartack and
3 sew second bead in reverse
⦁
stop the sewing at the first stitch
⦁
press «Quick reverse»-button
2
3
4
4 the sewing computer sews the upper bartack, the securing stitches and
stops automatically
►
«auto» appear in the Display
►
the buttonhole length is programmed
►
each subsequent buttonhole the programmed number of stitches are
sewn
033804.52.04_2013-09_Manual_B780_EN
̶ the first bead (left) is sewn forwards, the second bead (right) is
sewn in reverse
Buttonholes
91