Correcting The Combination; Alphabet In Combination With Functions - Bernina 780 User Manual

correcting the combination

1

alphabet in combination with functions

Inserting character
The letter is inserted below the cursor.
Activating desired place:
⦁ select or scroll to required letter in the Editing Area
►
the stitch pattern combination is moved to the starting position of the
desired stitch pattern in the stitch altering area
⦁ the starting point is indicated by a white dot 1 in the stitch hole of the virtual
presser foot
⦁
select new letter
►
the letter is inserted after the selected letter
Inserting an additional letter at the beginning of a pattern combination:
►
move the cursor to the top by using the arrow icons
Deleting Letters
A letter is deleted above the cursor.
Activating desired place:
⦁
select or scroll to required letter in the Editing Area
⦁
touch «i»-icon
⦁
touch «Delete»-icon or
⦁
select the desired letter with the finger, keep it pressed and move it to the
right
⦁
remove the finger from the Display
►
letter is deleted
Saving and deleting combinations see page 122, 128.
Selecting lower case letters
⦁ scroll through the alphabet using the scrolling icons until the lower case
letters appear
⦁ touch «abc»-icon in the large view of the alphabet, see page 114
altering font size
⦁ touch «i»-icon
⦁ touch «Font size»-icon
►
the small «A» turns dark and the icon is yellow-framed
►
the font size is reduced
⦁
touch the «Font size»-icon again
►
the big lettering is active again (big «A» is dark)
033804.52.04_2013-09_Manual_B780_EN
Alphabets
115