Functions - Bernina 780 User Manual

Functions

functions
overview «function»-buttons
«Start/Stop»-button
̶ starts and stops the sewing computer when
operating with or without foot control
̶ starts and stops the BSR-Function if the BSR
foot is attached and activated
«presser foot position»-button
⦁
press the button
►
the presser foot is lowered and lifted a bit
again for easy positioning of the material
►
the presser foot is lowered on the fabric when
start sewing
⦁ press the button again
►
the foot is lifted
«automatic thread cutter»-button
̶ the upper and the lower threads are cut
automatically
̶ 2-6 securing stitches can be programmed in
the setup program. These are sewn before the
thread is cut
«Quick reverse»-button
̶ secures the seam beginning and end: sews in
reverse as long as the button is pressed
̶ used to program the buttonhole length
̶ used to program the darning length
̶ used to determine end of stitching in straight
stitch Securing Stitch No. 5
̶ used for securing in Quilters securing program
No. 1324
32
033804.52.04_2013-09_Manual_B780_EN
«pattern begin»-button
̶ the needle moves to the beginning of a stitch
pattern or program
«needle stop»-button
⦁
press the button
►
the needle is raised or lowered in the same
way as by sinking the heel back on the foot
control
programmable «pattern end-/Securing»-button
⦁ press button before or during sewing
►
single pattern is secured at the end, with the
selected number of stitches programmed
⦁ press button before or during sewing of a
combination
►
the active pattern of the combination is
secured at the end, with the selected number
of stitches programmed
⦁ the number and type of the securing stitches
can be programmed in the setup program
►
a stop symbol which appears during sewing
indicates that the function is activated
Slide speed control
̶ the sewing and embroidering speed is infinitely
variable with the slide