Bernina 780 User Manual page 99

Decorative Stitches
tapering
98
Tapering is a technique in which the stitch patterns come to a point at the
beginning and end. Four different angles are pre-programmed and another
angle can be determined manually.
⦁
►
1
►
2
3
altering angle
⦁
⦁
►
►
⦁
4
5
6
7
⦁
⦁
⦁
⦁
⦁
033804.52.04_2013-09_Manual_B780_EN
select stitch No. 1401
the first section 1 is active
section 1 and 3 have a programmed length; you can set the length of
section 2 yourself by pressing «Quick reverse»-button
touch «i»-icon
touch «Angle type»-icon
the Display showing the overview of prgrammed angles appears
angle 4 is active
select another angle by touching the icons 5, 6 or 7
touch «man»-icon
use the top «+» and «-» icons to move the tips of the pattern from -1.00
(far left) to 1.00 (far right)
touch the yellow number in the center to place the tips in the center of the
pattern (0.00)
use the bottom «+» and «-» icons to set the angle of the tips between
0.00° and 90.00°
touch the yellow number in the center to set the angle to 45°