Embroidery Menu; Embroidering Using The «Start/Stop»-Button On The Headframe; Interrupting The Process; Completing The Color - Bernina 780 User Manual

Embroidery motifs

Embroidery menu

Embroidering using the «Start/Stop»-button on the headframe
178
►
embroidery menu is opened
►
the motif is ready for embroidering
⦁
press the «Start/Stop»-button on the headframe, until the embroidery
computer starts
►
the embroidery computer sews approximately 7 stitches and stops
automatically
►
a Display indicates that the thread tail has to be cut at the beginning of the
motif
⦁ raise the presser foot
⦁ cut the thread tail at the beginning of the motif
⦁ press the «Start/Stop»-button on the headframe and resume embroidering

Interrupting the process

⦁
press «Start/Stop»-button on the headframe
►
the embroidery computer stops

Completing the color

⦁
press «Start/Stop»-button on the headframe
►
the embroidery computer embroiders all the sections in the color activated
►
the embroidery computer stops automatically when complete
►
both threads are automatically cut

Color change

►
the emboidery computer switches automatically to the next color
⦁ change color of the upper thread accordingly
⦁ embroider with the new color
«Embroidery»-Display
►
after starting the motif the «Embroidery»-Display appears

Embroidery speed

To guarantee the best embroidery quality the speed when embroidering is
reduced according to the embroidery position. You have the options to choose
from optimal and maximum speed. Standard = optimal.
⦁
touch «Embroidery speed»-icon
►
the maximum embroidery speed-mode is activated
Please note that the quality of the embroidered motif may not be optimal at
maximum speed.
⦁ by touching «Embroidery speed»-icon again or by switching off or on the
embroidery computer, the optimum embroidery speed is activated again
033804.52.04_2013-09_Manual_B780_EN