Sewing Preparation; Power Switch/Power Cable; Magnetic Holder For Touchscreen Pen; Foot Control - Bernina 780 User Manual

Sewing preparation

power Switch/power cable

5
4
3

magnetic holder for touchscreen pen

1

foot control

2
3
1 Power Switch
The sewing computer is switched on («I») and off («0») with the power switch.
1
2
I
0 the sewing computer is switched off
2 Power plug socket
3 Foot control socket
4 PC-connection
5 USB-connection
The Touchscreen pen can be stored easily and securely at the two magnets 1.
connecting the foot control
⦁
⦁
⦁
1
Sewing speed control
Control the sewing speed by pressing the foot control 2 more or less.
4
raising or lowering the needle
⦁
6 5
►
removing the foot control
⦁
⦁
033804.52.04_2013-09_Manual_B780_EN
the sewing computer is switched on
unwind the cable
plug the cable in the outlet 1
unwind the cable to the desired length and slip into 4 or 5
sink the heel back 3 on the foot control
the needle adjusts the position up/down
wind the cable around the reel
plug cable into 6
uSa/canada only: use only foot controller type LV-1 with
sewing computer B 780.
Important Sewing information
17