«automatic Securing program»-button
►
press the button before sewing start = the
individual pattern/combination is secured at
the beginning with the number of programmed
stitches
►
keep the button pressed while sewing = the
sewing computer stops at once and sews the
number of programmed stitches
►
the number and type of the securing stitches
can be programmed in the setup program
Stitch width and Stitch length Knobs
(multifunction)
̶ to adjust stitch width or stitch length
̶ to alter thread tension
̶ to set the buttonhole slit width or the button
size
̶ to adjust the balance
̶ various alterations in the setup program
̶ various alterations when embroidering
«needle position»-buttons
⦁
press the left button
►
needle moves to the left
⦁
press the right button
►
needle moves to the right
⦁
keep button pressed
►
quick change
̶ total of 11 needle positions (5 left, 5 right,
1 center = 0)
033804.52.04_2013-09_Manual_B780_EN
Functions
needle stop position up and «Quick reverse»-
button
If «Quick reverse»-button is pressed while sewing
or after stopping (e.g. zig-zag) with programmed
needle stop up, the sewing computer sews one
stitch forward before it switches to sewing in
reverse.
needle stop position down and «Quick
reverse»-button
If «Quick reverse»-button is pressed after stopping
(e.g. zig-zag) with programmed needle stop
down, the sewing computer switches to sewing in
reverse immediately.
33