Important Information - Infopia GlucoLab Operation Manual

TM
Dear GLUCOLAB Auto-coding Blood Glucose
Monitoring System Owner
Thank you for choosing the GLUCOLAB
Monitoring System. This booklet has important information you need to know
about the GLUCOLAB TM Auto-coding Blood Glucose Monitoring System.
Please read it carefully.
We understand that self-testing of blood glucose level provides a way to control
your diabetes and may give you peace of mind by testing regularly. As a result
GLUCOLAB TM Auto-coding was developed to provide you with a fast and
accurate reading with a convenient and simple process. Our goal at GLUCO-
LAB TM Auto-coding is to provide the best quality healthcare products coupled
with superior customer service. Always
sional before making any changes to your diabetes management. The GLU-
COLAB TM Auto-coding Blood Glucose Monitoring System is for in vitro diag-
nostic use only.

Important information

The GLUCOLAB TM Auto-coding Blood Glucose Monitoring System is intended
for use outside the body (in vitro diagnostic use only). It should be used only for
testing blood glucose and only with fresh capillary whole blood samples. It
should not be used for the diagnosis of diabetes.
Consult your physician or diabetic healthcare professional about daily man-
agement of your diabetes and proper use of the glucometer.
Please pay close attention when handling blood. Improper procedures may
cause serious hazards to your health.
The GLUCOLAB TM Auto-coding Blood Glucose Monitoring System
small parts. Please keep your monitoring system out of reach of children.
4
www.infopia21.com
TM Auto-coding Blood Glucose
consult with your healthcare profes-
contains
Test Principle
The enzyme glucose oxidase on the blood glucose test strip reads specifically
with the blood glucose. The current generated is converted and displayed as
blood glucose value.
The GLUCOLAB TM Auto-coding Blood Glucose Monitoring System is plasma-
calibrated to allow easy comparison of results with laboratory methods.
A blood glucose meter which is calibrated against a whole blood method may
have different results in comparison to GLUCOLAB
The laboratory system used for calibration of the GLUCOLAB
Blood Glucose Monitoring System is YSI 2300 STAT plus which is equipped
with a glucose oxidase system.
Note
TM
< Maintaining the GLUCOLAB Auto-coding blood glucose test meter >
1. Do not assemble or disassemble the blood glucose test meter.
2. Please keep in a dry place.
3. Please keep clean and dry.
4. Please do not store in the same place as toxic chemicals or gases.
5. Keep out of direct sunlight.
CAUTION
1. If the code of the blood glucose test meter and of the blood glucose
test strip vial does not match, you must set the code number.
2. If the code on the LCD window and on the blood glucose test vial
do not match, follow the coding procedure for accurate results.
TM Auto-coding.
TM Auto-coding
5