Table of Contents
Advertisement
Testing Procedure
Step 3
After the beeping sound, the test will begin automatically and your results will
appear in 5 seconds. It should begin counting down from 5 to 1 second on
the LCD display window. The LCD window will display the result of your
blood glucose level, temperature and time.
Record the result value in your logbook. When blood glucose test strip is
removed, the blood glucose test meter turns off automatically.
CAUTION
1. If the test result is out of the test range, the Hi/Lo message will be shown on
the LCD. (refer to p35)
2. Safely discard used blood glucose test strip and lancet, to a proper place,
according to the local regulation.
24
24
www.infopia21.com
mmol/L
Testing Your Blood - Case of Setting User
Option
Step 4
If you selected to use the User Activity option dur-
ing set up, press
activity that correlates with your result (refer to
p10), then press
and
button to select the
.
25
25
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the GlucoLab and is the answer not in the manual?
Questions and answers
Just put in new batteries. Keep getting Er 6
Er 6 on the Infopia GlucoLab indicates a problem with the Auto-coding label. The recommended action is to place the battery again and set the blood glucose test meter. If the Er 6 message persists, contact your local representative.
This answer is automatically generated