Wiring The Terminal Type - Panasonic FP0 User Manual

Wiring
7.6

Wiring the Terminal Type

7.6 Wiring the Terminal Type
A screw-down connection type terminal block socket for terminal of FP0 control unit and
analog I/O unit is used. The terminal block socket and suitable wires are given below.
Suitable wire
Terminal block socket
Item
Manufacturer
Model
Product number
Suitable wires (twisted wire)
Item Description
Control unit Size: AWG #24 to 16
Conductor cross-sectional area: 0.3 to 1.25 mm
Analog I/O unit g / Size: AWG #28 to 16
Conductor cross-sectional area: 0.08 to 1.25 mm
Pole terminal with a compatible insulation sleeve
If a pole terminal is being used, the following models are marketed by Phoenix Contact
Co.
Manufacturer
Phoenix Contact Co.
Pressure welding tool for pole terminals
Manufacturer
Type
Product number
When tightening the terminals of the terminal block socket, use a screwdriver (Phoenix
Contact Co., Product no. 1205037) with a blade size of 0.4 × 2.5. The tightening torque
should be 0.22 to 0.25 N⋅m (2.3 to 2.5 kgf⋅cm) or less.
7 − 14
Terminal block socket
Description
Phoenix Contact Co.
MC1,5/9-ST-3,5
1840434
Cross-sectional
2
area (mm )
0.25
0.50
0.75
1.00
Phoenix Contact Co.
CRIMPFOX UD6
12 04 43 6
2
2
Size
AWG #24
AWG #20
AWG #18
AWG #18
FP0
Product number
AI 0,25−6YE
AI 0,5−6WH
AI 0,75−6GY
AI 1−6RD