Attachment To Din Rails - Panasonic FP0 User Manual

Installation
6.3

Attachment to DIN Rails

6.3 Attachment to DIN Rails
The FP0 unit enables one-touch attachment to DIN rails.
Procedure:
You can easily remove the FP0 unit as described below.
Procedure:
6 − 8
1. Fit the upper hook of the FP0 unit onto the DIN rail.
2. Without moving the upper hook, press on the lower
hook to fit the FP0 unit into position.
FP0 unit
2
1. Insert a slotted screwdriver into the DIN rail
attachment lever.
2. Pull the attachment lever downwards.
3. Lift up the FP0 unit and remove it from the rail.
FP0 unit
3
1
Slotted screwdriver
1
Mounting panel
DIN rail
DIN rail
DIN rail attachment
lever
2
FP0