Panasonic FP0 User Manual page 280

Name Boolean
Loop LOOP
Label LBL
Break BRK
End ED
Conditional CNDE
end
Eject EJECT
Step ladder instructions
Start step SSTP
Next step NSTL
NSTP
Clear step CSTP
Clear multi- SCLR
ple steps
Step end STPE
Note1) In the FP2/FP2SH/FP10SH, when the number "n" in a loop instruction has an index modifier, the
number of steps is the number in parentheses.
14-38
Symbol
The program jumps to the label instruction and continues
from there (the number of jumps is set in "S").
Stops program execution when the predetermined trigger
turns on in the TEST/RUN mode only.
The operation of program is ended. Indicates the end of a
main program.
The operation of program is ended when the trigger turns
on.
Adds page break fo ruse when printing.
The start of program "n" for process control
Start the specified process "n" and clear the process
currently started. (Scan execution type)
Start the specified process "n" and clear the process
currently started. (Pulse execution type)
Resets the specified process "n".
Resets multiple processes specified by "n1" and "n2".
End of step ladder area
Description Steps
4 (5)
Note1)
1
1
1
1
1
3
3
3
3
5
1