Before You Start - Panasonic FP0 User Manual

Before You Start

Before You Start
Installation environment
Do not use the unit where it will be exposed to the following:
Direct sunlight and ambient temperatures outside the
range of 0 C to 55 C/32 F to 131 F.
Ambient humidity outside the range of 30% to 85% RH
and sudden temperature changes causing condensation.
Inflammable or corresive gas.
Excessive vibration or shock.
Excessive airborne dust or metal particles
Water in any from including spray or mist.
Benzine, paint thinner, alcohol or other organic solvents
or strong alkaline solutions such as ammonia or caustic
soda.
Influence from power transmission lines, high voltage
equipment, power cables, power equipment, radio
transmitters, or any other equipment that would generate
high switching surges.
Static electricity
In dry locations, excessive static electricity can cause
problems. Before touching the unit, always touch a
grounded piece of metal in order to discharge static
electricity.
Cleaning
Do not use thinner based cleaners because they deform
the unit case and fade the colors.
Power supplies
An insulated power supply with an internal protective
circuit should be used. The power supply for the FP0
control unit operation is a non-insulated circuit, so if an
incorrect voltage is directly applied, the internal circuit
may be damaged or destroyed. If using a power supply
without a protective circuit, power should be supplied
through a protective element such as a fuse.
ii
FP0