Installation Using Fp0 Flat Type Mounting Plate - Panasonic FP0 User Manual

Installation
6.5

Installation Using FP0 Flat Type Mounting Plate

6.5 Installation Using FP0 Flat Type Mounting Plate
Use M4 size pan−head screws for attachment of FP0 flat type mounting plate
(AFP0804) and install according to the dimensions shown below.
For a diagram showing detailed dimensions of the FP0 flat type mounting plate, see
*section 13.5.
FP0 flat type
screws
mounting plate
Procedure:
Notes
The FP0 flat type mounting plate (AFP0804) cannot be used for
an expansion unit.
6 − 10
Mounting panel
1. Raise the expansion hooks on the top and bottom of
the unit.
2. Install the FP0 unit on the FP0 flat type mounting
plate.
3. Align the expansion hooks with the plate and press
the hooks back down.
1
3
2
3
1
FP0 flat type mounting
plate
FP0
next page