Adjusting Of Audio Recording Levels - JVC BD-X201MS Instructions Manual

Adjusting of Audio Recording Levels

This DVD recorder's audio recording levels can be adjusted using two different methods, and AUDIO REC VOLUME MODE from
the RECORDER MENU (2/2) screen indicates the method to be used. In addition, it is also possible to return the audio recording
levels to their default settings (i.e., unity gain).
Note: The AUDIO INPUT LEVEL switch on the DVD recorder's rear panel can be used to select the reference input level for
analog audio (i.e., +4 dB or −8 dB).
Selecting the Adjustment Method
RECORDER MENU (2/2) screen
RECORDER MENU (2/2)
BACK
AUDIO CHANNEL (DV)
AUDIO REC VOLUME MODE
ASPECT
INDEX CREATION
Adjusting the Audio Recording Levels
Audio level indicator
Return from setting screens to the normal display.
Recording levels can be adjusted in either Stop or Recording mode. Be sure to monitor the front panel's audio level indicator as
the levels are being adjusted. Adjust the level so that the LED on the far right does not light.
Adjusting both channels together (BOTH)
To raise the recording level
Press the M button while holding the L or K
button to raise the audio recording levels for
Channel 1 and Channel 2 simultaneously.
SET
To lower the recording level
Press the N button while holding the L or K
button to lower the audio recording levels for
Channel 1 and Channel 2 simultaneously.
SET
Returning Audio Recording Levels to Default Settings (UNITY MODE)
Press and hold the L and K buttons simultaneously to return the audio recording levels to their default settings (i.e., unity
gain).
• Both of the audio recording levels will be fixed at the default setting.
1.
Open the RECORDER MENU (2/2) screen.
To do this, select r button from the RECORDER MENU (1/2) screen and
press the SET button.
2.
Make the required setting using AUDIO REC VOLUME MODE from the
→
RECORDER MENU (2/2) screen.
1,2ch 1,2ch
BOTH
BOTH
AUTO
MANUAL
INDEPENDENCE : The CH1/CH2 are adjusted separately.
OPERATE
AUDIO
CH1
DOLBY DIGITAL
LPCM MPEG
CH2
PHONES REV
Settings & Controls for Recording
: Audio levels are adjusted while both the CH1/CH2 are
maintained at the same volume.
TITLE CHAPTER
STOP PLAY FWD PAUSE REC TOP
MENU MENU
Adjusting both channels separately (INDEPENDENCE)
To adjust the Channel 1 level
Press either the M or N button while hold-
ing the L button.
Pressing the M button raises the recording
SET
level.
Pressing the N button lowers the recording
level.
To adjust the Channel 2 level
Press either the M or N button while hold-
ing the K button.
Pressing the M button raises the recording
SET
level.
Pressing the N button lowers the recording
level.
BUSY
OPEN/CLOSE
OPTION DV Y/C LINE
SET UP
Buttons used
SET
E-33