JVC BD-X201MS Instructions Manual page 29

Erasing All Data From a DVD-RW/DVD+RW Disc
DISC menu screen
DISC MENU
MENU
FINALIZE
CANCEL DISC FINALIZATION
AUTO FINALIZE
AUTO CANCEL DISC FINALIZ.
( QUICK )
DISC ERASE
DISC ERASE
( FULL )
LAST TITLE ERASE
DISC ERASE (QUICK)
Note
When either a new DVD-RW/DVD+RW
or one that has been erased on another
machine is inserted, quick erase starts
up.
Canceling the Finalization of a DVD-RW/DVD+RW
When adding an extra recording to a finalized DVD-RW/DVD+RW, cancel the finalization.
DISC menu screen
DISC MENU
MENU
FINALIZE
CANCEL DISC FINALIZATION
AUTO FINALIZE
AUTO CANCEL DISC FINALIZ.
( QUICK )
DISC ERASE
DISC ERASE ( FULL )
LAST TITLE ERASE
CANCELING DISC FINALIZATION
1.
Insert the DVD-RW/DVD+RW from which data is to be erased.
2.
Press the SET UP button to display the Setup Menu.
3.
Use the N and M buttons to select DISC item and then press the SET
button.
CANCEL • The DISC menu screen will appear.
CANCEL
4.
Press the N or M button, select either the DISC ERASE (QUICK) item or
OFF
OFF
the DISC ERASE (FULL) item, then press the SET button.
EXECUTE
• The setting value list box is displayed.
CANCEL
DISC ERASE (QUICK) : Only the disc control area is erased. (Quick Erase)
CANCEL
DISC ERASE (FULL) : All areas of the disc are erased. (Full Erase) This
5.
Use the N and M buttons to select EXECUTE from the list and then
press the SET button.
• The erasing of data will begin.
The message "DISC ERASE" appears and the state of progress is dis-
played using a progress bar.
• When all data has been erased, the progress bar will disappear.
CAUTIONS
• All of the data recorded to the disc will be erased in this process. Before start-
ing, therefore, confirm that no important data is stored on this disc.
• Under no circumstances should the power be turned off or the power cord
disconnected while data is being erased.
1.
Insert the DVD-RW/DVD+RW whose finalization you want to cancel.
2.
Press the SET UP button and the set up top menu screen will be dis-
played.
3.
Press the N or M button to select the DISC item, then press the SET
button.
CANCEL
EXECUTE • The DISC menu screen is displayed.
OFF
4.
Press the N or M button, and select the CANCEL DISC FINALIZATION
OFF
CANCEL
item, then press the SET button.
CANCEL
• The setting value list box is displayed.
CANCEL
5.
Press the N or M button, select EXECUTE from the list box, then press
the SET button.
• Cancellation of finalization starts.
Execution status will be displayed on a progress bar.
• When completed, the progress bar disappears.
Notes
• When canceling finalization, the TOP MENU created when finalizing is
deleted.
• Discs finalized on another machine cannot be cancelled.
Settings & Controls for Recording
Compared with Full Erase the time to erase is
shorter.
setting is recommended for repeated use of a disc.
E-29