JVC BD-X201MS Instructions Manual page 69

Jvc dvd recorder instructions
Hide thumbs Also See for BD-X201MS:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
SYSTEM MENU (2/2) screen
Parameter
Possible settings
AC IN MODE
AC
SYNC SYSTEM
SYNC
TV TYPE
TV
VBID OUT (WIDE)
Vbid
Y/C TERMINAL
MODE
Y C TM
OPERATION
LOCK
oPLoCK
[POWER ON]
For selecting whether to start up in the Operate ON or OFF mode when the MAIN POWER
switch at the rear of this unit is turned ON.
POWER OFF
POWER ON : Start up in Operate ON mode
[oN]
POWER OFF: Start up in Operate OFF mode
oFF
[AUTO]
For selecting the synchronization method for this unit.
AUTO
INTERNAL
INTERNAL : Set to internal synchronization
[AUTo]
INTE
[NTSC (U)]
For selecting the signal system during recording and playback.
NTSC (U) : When recording/playing back in the NTSC mode (for USA)
NTSC (I)
NTSC (I)
PAL
PAL
[NTU]
This unit will automatically be rebooted when this setting is changed.
NTI
Upon reboot, all menu items except the date/time data and hour meter will be restored to their
PAL
default values.
[OFF]
For selecting whether to add the JCPX-1204 standard-compliant VBID (Video Blanking ID) sig-
nals to the analog video signals output from this unit. (NTSC only)
ON
OFF
[oFF]
ON
oN
[S1]
This parameter is used to set the specification for the DVD recorder's VIDEO Y/C INPUT and
OUTPUT terminal in order to enable the recording of wide-screen discrimination signals.
S2
S1
S2
[S1]
S2
Squeezed video: 16:9 wide-screen content with the left and right sides compressed for nor-
Letterbox video : Content with the top and bottom of the screen blackened out.
[OFF]
For selecting whether to enable operation lock.
OFF
ON
ON
[oFF]
oN
: Switches automatically between internal and external synchronization
: When recording/playing back in the NTSC mode (for Japan)
: When recording/playing back in the PAL mode
: Do not add VBID signals (Copyguard signals will be added.)
: Add VBID signals
: S1 terminal mode is to be adopted. A discrimination signal for normal video with a
4:3 aspect ratio and squeezed video is to be recorded.
: S2 terminal mode is to be adopted. A discrimination signal for normal video with a
4:3 aspect ratio, squeezed video, and letterbox video is to be recorded.
mal aspect screens.
: Operation lock turns OFF and all operation buttons on the main unit are enabled
: Operation lock turns ON and operation buttons on the main unit are disabled
However, the CLOSE/OPEN, SET UP, SET and cursor buttons will not be dis-
abled.
Description
Setup Menu
E-69

Advertisement

Table of Contents
loading

Table of Contents