Checking The Video Input - JVC BD-X201MS Instructions Manual

Settings & Controls for Recording

Checking the Video Input

Use the monitor connected to the VIDEO LINE OUT or Y/C OUT terminal to confirm that the input video signal is as required.
The following procedure will allow you to monitor the quality at which the video will be recorded to a DVD.
REC button
The setting value of the
ENCODE QUALITY is indi-
cated on the LCD display.
ENCODE XX
UXP, XP, SP, LP,
EP, DLP, DEP
E-34
VIDEO LINE OUT terminal
Signal Connections
Connect the VIDEO LINE OUT or Y/C OUT terminal to the monitor.
Procedure
Press and hold the REC button for at least 2 seconds while the DVD
recorder is stopped or inserted with no disc. While this button is being
held, input signal encoded/decoded in MPEG will be output via the
VIDEO OUT or Y/C OUT terminal on the rear panel.
• This function allows the quality of the video to be confirmed before recording
to a DVD.
Note
Audio will be muted at this time.
Monitor screen