Ending The Editing Of Chapter Menus - JVC BD-X201MS Instructions Manual

Title & Chapter Menu Settings

Ending the Editing of Chapter Menus

Once all of the necessary changes and checks have been made using the THUMBNAIL EDIT screen, title closing must be carried
out.
Please ensure that title closing is performed as the last stage of chapter menu editing.
Even if the chapter menu is to be left unchanged, title closing must be carried out to leave the THUMBNAIL EDIT screen. Note
that when title closing has been completed, chapter menu details will be permanently set.
1.
THUMBNAIL EDIT
TITLE CLOSE
AAA BBBB
april
DDD EEE
CHAPTER MENU TEXT LOAD
THUMBNAIL EDIT
TITLE CLOSE
AAA BBBB
april
TITLE CLOSE
2.
YES NO
TEXT LOAD
CHAPTER MENU
Select NO and then press the SET
button to close the confirmation
window.
The title will not be closed in this
case.
E-52
1.
Select TITLE CLOSE from the THUMBNAIL EDIT screen and press the
SET button.
• A confirmation window will appear.
CCC
2.
If you wish to proceed with title closing, select YES and then press the
SET button.
FFF
• Title closing will begin. The "PLEASE WAIT" message will be displayed on
TEMP LOAD
When title closing has been completed, the message bar will disappear.
CCC
Notes
• A maximum of 10 minutes will be required to complete title closing.
• If EDIT MENU from the DVD MENU screen is set to DISABLE, title closing
will be carried out automatically whenever recording is ended by, for exam-
ple, pressing the STOP button. In such a case, title and chapter menus are
TEMP LOAD
created using preset settings.
the monitor.