Operating Your - Electrolux Mercury 4U600 User's Manual And Installation Instructions

Electric cookers - rear control
Table of Contents

Advertisement

Clocks (cont)
Setting the cooking duration
1. Check the clock displays the correct time of day.
2. select the desired oven function and temperature. the
oven indicator light will glow and the heating source will
come on.
3. Press the “mode“ button until the “cook time” indicator
begins flashing.
4. set the cooking duration you want by using the – or +
buttons. 5 seconds after the last change, the “cook time”
indicator will stop flashing, and the time of day will be
displayed.
note: do not forget to add preheating time if necessary.
Setting the cooking end time
1. Check the clock displays the correct time of day.
2. select the desired oven function and temperature. the
oven indicator light will glow and the heating source will
come on.
3. Press the “mode“ button until the “end time” indicator
begins flashing.
4. enter the time of day you want to finish cooking by
pressing the – or + buttons. 5 seconds after the last
change, the “end time” indicator will stop flashing and the
current time of day will be displayed.
Setting the delayed start cooking time
1. Program the “cook time“ and “end time“ as described
in the relevant sections. once both the “cook time“ and
“end time“ have been set, the “cook time“ and “end time”
indicators will stop flashing and the current time of day will
be displayed.
To check or cancel settings
1. to check your settings, press the mode button until the
setting you want is displayed. A red light will flash next to
the mode (cook time, end time, etc) that is currently on
display.
2. to cancel “delayed start” press the mode button until
a light flashes next to “end time”. Press and hold the –
button until the clock no longer reverses (you will hear a
beep). If you have left the temperature and function knobs
at a setting the oven will start once the “end time” light
stops flashing.
3. to cancel “auto shut off” press the mode button until a
light flashes next to “cook time”. Press and hold the –
button until the clock no longer reverses at (“0:00” and
you will hear a beep). this automatically cancels “delayed
start”. If you have left the temperature and function knobs
at a setting, the oven will start once the “cook time” light
stops flashing. Because you have cancelled “auto off” the
oven will continue to heat until you manually turn it off.
On completion of cooking
the oven will turn off, the timer will beep and the “end time“
and/or “cook time“ indicators will flash.
1. turn the function and temperature controls to the off
position.
clocks
22

Operating your

60 minute ringer timer
2. Press any button to stop the timer from beeping.
to set the timer, simply turn the knob clockwise to the
required number of minutes.
note: for any time below ten minutes turn the knob past
the ten then turn it back to the required number of minutes.
When the timer returns to zero, the timer gives a short ring.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents