Clocks; Operating The Programmable Clock - Electrolux Mercury 4U600 User's Manual And Installation Instructions

Clocks

Before operating your
appliance for the first time
3 button programmable clock
PROGRAM TIMER
cook time
end time
— MODE
After the appliance has been switched on "12.00" will be
displayed and the "clock indicator" will flash.
1. to set the time of day in hours and minutes, press the –
or + buttons. 5 seconds after the last change, the "clock
indicator" will disappear, confirming the time has been
set. once the time has been entered, the clock advances
minute by minute.
note: the clock has a 24-hour display.
the clock must be set to operate the oven.
PROGRAM TIMER
cook time
end time
— MODE
timer
clock
+
timer
clock
+
Operating the
programmable clock
3 button programmable clock
PROGRAM TIMER
cook time
end time
+
— MODE
General features
Your 3 button programmable clock has the following features:
• timer – your 3 button programmable timer allows you to
set a countdown time that will beep when the set time has
elapsed.
• Cooking duration – You can set a cooking duration. A timer
will count down the preset cooking time, beep when the
time has elapsed and turn the oven off.
• end cooking time – you can set a cooking finish time. A
timer will count down the preset cooking time, beep when
the finish time has been reached and turn the oven off.
• delayed start cooking time – You can combine the cooking
time and stop cooking time to switch the oven on and off
at a specific time during the day.
note: Your 3 button programmable timer only operates with
your main oven.
Change the time of day (Daylight saving)
1. Press the "mode" button until the "clock" indicator begins
flashing.
2. Press the – or + buttons to change the time. 5 seconds
after the last change, the "clock" indicator will disappear,
confirming the time has been set.
Setting the timer
1. Press the "mode" button until the "timer" indicator begins
flashing.
2. set the countdown time you want by using the – and
+ buttons. 5 seconds after the last change the "timer"
indicator will stop flashing, confirming the timer has been
set.
3. to stop the beeper, press any button.
timer
clock
clocks 21