Avaya 1400 Series Installation And Maintenance Manual page 16

1400 Series Digital Deskphones Installation
6. Copy the latest 1400 Series Digital Deskphones firmware that you downloaded from
www.avaya.com/support
7. Start your TFTP server.
8. Browse your firmware outbound and inbound file, and make sure your TFTP server is
running.
9. From the Avaya Aura Communication Manager administration interface, enter the change
tftp-server command.
The TFTP Server Configuration screen appears.
10. In the Local Node Name field, enter Procr.
11. In the TFTP Server Node Name field, enter the name of the computer that is running the
TFTP server.
12. Make sure the TFTP Server Port field is set to 69.
13. In the File to Retrieve field, enter the name of the firmware file. Be sure to include the .bin
suffix in the filename.
14. Save your changes.
15. Enter the change feature-access-codes command.
The Feature Access Codes screen appears.
16. In the Station Firmware Download Access Code field, enter the FAC value you want use (for
example, *35).
17. Save your changes.
18. Log out of the Avaya Aura Communication Manager administration interface.
19. Perform one of the following steps:
If you are at the target station that you want to upgrade, dial the FAC you specified in the
●
Station Firmware Download Access Code field (for example, *35), and then press the #
button.
If you are not at the target station that you want to upgrade, dial the FAC you specified in
●
the Station Firmware Download Access Code field (for example, *35), and then dial the
extension of the target station.
20. Place the telephone on-hook within four seconds after hearing the confirmation tone.
21. Repeat steps 19 and 20 for each station you want to upgrade.
16 Avaya 1400 Series Digital Deskphones Installation and Maintenance Guide
to your TFTP server.
http://