Avaya 1400 Series Installation And Maintenance Manual page 13

1. Plug one end of the modular line cord into the line jack on the 1400 Series Digital
Deskphone.
2. Plug the other end of this cord into the wall jack.
If you are connecting a DBM32 Button module to a 1416 telephone:
1. Plug one end of the cord that shipped with the DBM32 Button module into the jack on the
DBM32 Button module.
2. Plug the other end of the cord that shipped with the DBM32 Button module into the MOD
jack on the 1416 telephone.
3. Plug one end of the line cord that shipped with the 1151C power supply into the IP/DCP
PHONE jack on the 1151C power supply.
4. Snap the clamp-on ferrite onto the other end of the line cord that shipped with the 1151C
power supply within 3 inches of the connector (as shown in Figure 3).
5. Plug the other end of the line cord that shipped with the 1151C power supply into the line
jack on the 1416 telephone.
6. Plug one end of the modular line cord into the LAN/PBX jack on the 1151C power supply.
7. Plug the other end of the modular line cord into the wall jack.
8. Plug the power cord of the 1151C power supply into the wall electrical socket.
Assembling the 1400 Series Digital Deskphones
Issue 1 May 2010 13