Chapter 3: Administering 1400 Series Digital
Introduction
This chapter describes how to administer 1400 Series Digital Deskphones on Avaya Aura
Communication Manager.
Administering a 1400 Series Digital Deskphone
Perform the following steps for each 1400 Series Digital Deskphone:
1. Log into the Avaya Aura Communication Manager administration interface.
2. Perform one of the following steps:
If you are adding a new extension and want to assign a specific extension number, use
●
the add station nnnn command, where nnnn is the new extension you want to assign.
If you are adding a new extension and want to assign the next available extension
●
number, use the add station next command.
If you are installing the 1400 Series Digital Deskphone at an existing extension, use the
●
change station nnnn command, where nnnn is the existing extension you want to
modify.
The Station screen appears.
3. Perform one of the following steps:
If you are administering a 1408 telephone, type 2410 in the Type field.
●
If you are administering a 1416 telephone, type 2420 in the Type field.
●
4. In the Port field, type the port address.
5. In the Name field, type the name to associate with this telephone.
Deskphones
Issue 1 May 2010
19