Installation Planning - Valor Ventana 1200EAN Installation & Owner's Manual

QUALIFIED
INSTALLER
Co-linear terminal confi gurations
10"
10"
7-5/8" dia.
collar
3" Inlet & Exhaust
Collars
559CLT Co-Linear Terminal
Installer—READ THIS FIRST
Only qualifi ed licensed or trained personnel
should install this appliance.
BEFORE YOU START, YOU NEED TO KNOW
FROM THE HOMEOWNER:
• The height of the fl oor or hearth fi nish;
• The thickness and type of the wall fi nish
around the fi rebox opening;
• What accessories (surround, door, etc.) will be
installed with this fi replace if any;
• The venting confi guration.
1. Unpack the appliance.
2. Check that you have everything.
3. Finish framing.
4. Fit appliance into framing.
5. Remove overlay, barrier screen bottom brackets
and fi x the appliance to the fl oor.
6. Reinstall overlay and screen bottom brackets.
7. Install venting system.
8. Install restrictor.
9. Connect and test gas supply.
10. Install bricks and logs.
11. Refi t window.
12. Connect electrical wiring for decorative light.
13. Install optional wall switch if required.
34
Co-Linear Venting
559FSK Flashing Kit

Installation Planning

Alternate to 559CLT/559FSK Conversion
Terminal Cap
14. Put batteries in receiver and remote control
handset.
15. Perform initial remote control set-up.
16. Verify operation and adjust aeration settings.
17. Install the remote control handset wall holder.
18. Instruct the homeowner on the operation and
maintenance of the fi replace.
19. Install the window skirt.
20. Install the control access doors.
21. Install the andirons and fret if required.
22. Finish the wall around the fi replace.
23. Install the surround/doors/mantel if required.
24. Install the barrier screen.
Co-Linear to Co-Axial
Adapter
Flashing