Operating Your Fireplace; How To Turn Your Fireplace Off (Including Pilot); How To Ensure Your Fireplace Cannot Be Turned On Inadvertently - Valor Ventana 1200EAN Installation & Owner's Manual

OWNER'S
INFORMATION
this manual. Please always quote the part number and
description when requesting spare parts.

Operating Your Fireplace

There are three ways to control your fi replace.
1. Thermostatic Remote Control;
2. Wall Switch;
3. Manual On/Off Switch.
The manual On/Off switch must be ON for the fi replace
to function. It can be used to shut off the fi replace in
case of emergency—see next section.
The Thermostatic Remote Control can be programmed
to function automatically—see pages 11–15.
The Wall Switch (optional) can be used to turn on, off
and to increase or decrease the fl ame height—see
1265WSK—Wall Switch Kit.
Thermostatic Remote
Wall Switch
Control
(optional)
NOTE: The remote control in the AUTO mode will
override the wall switch.
How to Turn Your Fireplace OFF
(including pilot)
Familiarize yourself with each of these methods before
operating your fi replace.
Press and hold the OFF button for a second (either on
the handset or the wall switch).
If the fl ames are on, they go down and you hear the
valve motor wind down. You hear a clunk and a beep
Remote control
handset
10
Owner's Information
Manual On/Off Switch
Wall Switch
indicating that the valve has received the signal from
the remote control.
How to Ensure Your Fireplace Cannot
Be Turned ON Inadvertently
You can use one of the two following methods to
ensure that your fi replace will not turn on when you
don't want it on.
First, ensure your fi replace is turned off—including
the pilot—and cold BEFORE going ahead.
• You can prevent your fi replace from lighting by
X
The receiver and gas
valve are located on
the left of the fi rebox
behind the side door.
ON
OFF
Manual ON/OFF Switch
pressing the O button on the manual ON/OFF
switch on the gas valve.
• Alternately, remove all batteries from the receiver as
well as the battery from the handset.
Automatic Shut-Off (in certain conditions)
Your fi replace's remote control is equipped with an
automatic shut-off mechanism which is activated in
certain conditions. See page 15 in the Remote Control
Operation section for a description of this feature.