FireBird Combi Range Installation Commissioning Servicing & User Instructions page 11

2
TECHNICAL SPECIFICATION
2-E&F Riello Burner Specification
ELECTRODE SETTING
Riello RDB
Attention
Before assembling or
removing the nozzle
loosen screw (A) and
move electrodes forward.
RIELLO BURNER START-UP CYCLE
NOTE: Above information provided relevant to Riello RDB Burner. The
Firebird 'S' Range has been tested and will operate equally efficiently
using Ecoflam or Sterling Burners which may also be fitted
as original equipment.
Refer to separate burner instructions booklet packed with boiler. Separate
Riello Burner instructions are also included when these burners are fitted.
Always consult these as variations in specification can occur from time to
time which may not be included in this manual. Information is more
complete in appropriate burner manuals.
10