To accomplish this, for small periods of time, the MC67 alternately enables and disables battery charging to keep the
battery at acceptable temperatures. The MC67 indicates when charging is disabled due to abnormal temperatures via
its LED.
Four Slot Ethernet Cradle
This section describes how to use a Four Slot Ethernet cradle with the MC67. For cradle communication setup
procedures refer to the MC67 Integrator Guide.
The Four Slot Ethernet cradle:
•
Provides 5.4 VDC power for operating the MC67
•
Connects the MC67 (up to four) to an Ethernet network
•
Simultaneously charges up to four MC67 devices.
Charging the MC67
Procedure:
1 Insert the MC67 into a slot to begin charging.
Figure 74: MC67 Battery Charging
2 Press down on the MC67 to ensure that it is seated properly.
Battery Charging
Main Battery Charging
The MC67's Charging/Battery Status LED indicates the status of the battery charging in the MC67.
The 3600 mAh battery fully charges in less than six hours.
Charging Temperature
Charge batteries in temperatures from 0 °C to 40 °C (32 °F to 104 °F). Charging is intelligently controlled by the
MC67.
To accomplish this, for small periods of time, the MC67 alternately enables and disables battery charging to keep the
battery at acceptable temperatures. The MC67 indicates when charging is disabled due to abnormal temperatures via
its LED.
LED 1 LED 2
MN000115A01 | January 2014 |
Accessories | 109
Send Feedback