Four-slot Ethernet Cradle
CAUTION
The Four-slot Ethernet cradle:
•
Provides 5.4 VDC power for operating the mobile computer.
•
Connects the mobile computer (up to four) to an Ethernet network.
Synchronization with a host computer using ActiveSync cannot be performed wit the Four-slot Ethernet cradle.
To synchronize with a host computer, use the SIngle-slot USB cradle.
Setup
Connect the Ethernet cradle (Ethernet port 1) to an Ethernet hub or a port on the host device.
Connect the Ethernet cradle (power port) to a Motorola approved power supply.
Ethernet Switch
Connection
Four-slot Ethernet Cradle Connection
Figure 2-5
Ethernet Cradle Drivers
The Ethernet cradle drivers are pre-installed on the MC21XX and initiate automatically when the MC21XX is
placed in a properly connected Four-slot Ethernet cradle.
When the MC21XX is inserted into the Four-slot Ethernet cradle, the LAN icon indicates that the MC21XX is
connected to a network.
Ensure that you follow the guidelines for battery safety described in
5-2.
Ethernet Port 1
Power Port
Accessories
Battery Safety Guidelines on page
2 - 7