Charging The Mc32N0 Battery; Battery Charging In The Four Slot Charge Only Cradle; Four Slot Ethernet Cradle - Motorola MC32N0 Integrator Manual

Figure 28: Four Slot Charge Only Cradle Setup

Charging the MC32N0 Battery

Procedure:
1 Ensure that the cradle is connected to power.
2 Slide the mobile computer into the slot in the cradle. The mobile computer amber Charge LED Indicator, indicates
the mobile computer battery charging status.
3 Gently press down on the device to ensure proper contact.
4 When charging is complete, remove the mobile computer from the cradle slot.

Battery Charging in the Four Slot Charge Only Cradle

The MC32N0's Charge LED indicates the status of the battery charging in the MC32N0. See
Indicators on page 23
The Standard Battery charges in less than five hours and the Extended Battery charges in less than eight hours.
Charging Temperature
Charge batteries in temperatures from 0 °C to 40 °C (32 °F to 104 °F). Charging is intelligently controlled by the
MC32N0.
To accomplish this, for small periods of time, the MC32N0 or cradle alternately enables and disables battery charging
to keep the battery at acceptable temperatures. The MC32N0 or cradle indicates when charging is disabled due to
abnormal temperatures via its LED.

Four Slot Ethernet Cradle

Caution: Ensure that you follow the guidelines for battery safety described in
page 159.
The Four Slot Ethernet cradle:
• Provides 5.4 VDC power for operating the mobile computer.
• Connects the mobile computer (up to four) to an Ethernet network.
for charging status indications.
Accessories | 39
Table 1: LED Charge
Battery Safety Guidelines on
MN000887A01-B | April 2015