Appendix B Supported Input Timing Modes; Supported Input Timing Modes - Advantech FPM-3170 Series User Manual

Appendix B Supported Input Timing
B.1 Supported Input Timing Modes
The nineteen kinds of timings below are already programmed into this
module. The input synchronous signals are automatically recognized.
Resolution
640x480
800x600
1024x768
1280x1024
1600x1200
Note 1:
Note 2:
Note 3:
FPM-3170 Series User Manual
Modes
56H z 60H z
Yes
Yes Yes
Yes
Yes
Yes
Table B-1: Supported Input formats
Even if the preset timing is entered, a little adjust-
ment of the functions such as Horizontal period,
CLK-delay and display position, are required. The
adjusted values are memorized in every preset num-
ber.
This module recognizes the synchronous signals
with near preset timing of the frequency of the HS
and Vsync, even in the case that the signals other
than the preset timing that were entered.
Because adjustments may not fit, such as differing
magnifying ratios or, in the case that you use it
except for the display timing that was preset.
Vertical Frequencies
70H z 72H z
Yes
Yes Yes
Yes
Yes
34
75H z 85H z
Yes X
Yes X
Yes X
Yes X