Related Manuals for Advantech FPM-3150 Series
Summary of Contents for Advantech FPM-3150 Series
-
Page 1: User Manual
FPM-3150 Series Flat Panel Monitor with 15" Color TFT/LCD Display enchanced version User Manual... -
Page 2: Copyright Notice
Copyright Notice This document is copyrighted by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements to the products described in this manual at any time. Specifications are thus subject to change without notice. - Page 3 Product Warranty (1 year) Advantech warrants to you, the original purchaser, that each of its prod- ucts will be free from defects in materials and workmanship for one year from the date of purchase. This warranty does not apply to any products which have been repaired or...
- Page 4 • Increase the separation between the equipment and the receiver • Connect the equipment to a power outlet on a circuit different from that to which the receiver is connected • Consult the dealer or an experienced radio/TV technician for help FPM-3150 Series User Manual...
- Page 5 If any of these items are missing or damaged, contact your distributor or sales representative immediately. Additional Information and Assistance Visit the Advantech web site at www.advantech.com where you can find the latest information about the product. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance.
- Page 6 The equipment has been exposed to moisture. d. The equipment does not work well, or you cannot get it to work according to the user's manual. e. The equipment has been dropped and damaged. f. The equipment has obvious signs of breakage. FPM-3150 Series User Manual...
- Page 7 The sound pressure level at the operator's position according to IEC 704- 1:1982 is no more than 70dB(A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein. Wichtige Sicherheishinweise Bitte lesen sie Sich diese Hinweise sorgfältig durch.
- Page 8 IEC-704-1 erstellt. Advantech lehnt jegliche Verantwortung für die Richtigkeit der in diesem Zusammenhang getätigten Aussagen ab. DISCLAIMER: This set of instructions is given according to IEC704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein. FPM-3150 Series User Manual...
-
Page 9: Table Of Contents
Figure 2.3: Rack Mounting by Rack Mounting Brackets ..10 2.2 Desktop, Swing-ARM for FPM-3150 ........11 2.2.1 Desktop Stand ................. 11 Figure 2.4: Desktop Stand for FPM-3150 Series ....11 2.2.2 Swing-ARM (VESA Compliant) ........... 12 Figure 2.5: Swing-ARM for FPM-3150 Series ...... 12 Appendix A Touchscreen ........... - Page 10 Appendix C OSD..............36 C.1 Keypad Interface................ 36 C.2 Power Indicator LED Status ............36 C.3 OSD Function ................37 FPM-3150 Series User Manual...
- Page 11 Introduction This chapter includes: • Introduction • Specifications • LCD Specification • Power Consumption • Connectors • Dimensions...
-
Page 12: Chapter 1 Introduction
Chapter 1 Introduction 1.1 Introduction Advantech's FPM-3150 is a 15" color TFT LCD flat panel monitor built specifically for industrial applications. With the optional touchscreen, FPM-3150 is an excellent and user-friendly system control interface. In addition to its usual application as an LCD panel monitor, FPM-3150 comes standard with direct VGA control signal input, making it compati- ble with Industrial PCs and Workstations. -
Page 13: Lcd Specification
Touchscreen (Optional) • Type: 8 wire, analog resistive • Resolution: 1024 x 1024 • Light Transmission: 75% (Gouge Hardness is greater tahn 4H per ASTM D3363-92 for HCC01, HCG10 and HCG12 • Operating Pressure: 30 ~ 45 gram for stylus pen contact bounce <... -
Page 14: Connectors
RS-232 port of the PC. The touchscreen cable is included with all orders which include the touchscreen option. DC 12V Power In This connector will be connected to the DC 12V Switching Power Supply. FPM-3150 Series User Manual... -
Page 15: Dimensions
1.6 Dimensions Figure 1.1: FPM-3150G Dimensions Chapter 1... - Page 16 FPM-3150 Series User Manual...
- Page 17 Mounting • Wall Mounting • Panel Mounting • Rack Mounting • Desktop Mounting • Swing Arm Mounting...
-
Page 18: Chapter 2 Mounting
Chapter 2 Mounting 2.1 Mounting the Monitor The FPM-3150 Series can be mounted in many different ways. The ver- satility of the FPM-3150 mounts enable it to be mounted on your desk or anywhere else. 2.1.1 Wall Mounting FPM-3150 can be mounted directly on a wall with panel mounting brack- ets. -
Page 19: Panel Mounting
2.1.2 Panel Mounting If you need to install the FPM-3150 series in a panel, please release the mounting brackets by detaching four screws on rear side and fix them on the top and bottom with screws. Panel Mounting Brackets Figure 2.2: Panel Mounting (cut out dimension: 396 x 296 mm) -
Page 20: Rack Mounting (Optional)
FPM-3150 (Part Number is FPM-3150Rack-MT). Attach the two rack mounting brackets on each side of FPM-3150 with 12 screws, then affix the monitor in the rack. Figure 2.3: Rack Mounting by Rack Mounting Brackets FPM-3150 Series User Manual... -
Page 21: Desktop, Swing-Arm For Fpm-3150
2.2 Desktop, Swing-ARM for FPM-3150 The FPM-3150 Series can be mounted in other ways. These is a desktop stand for desktop use and it can also be attached to a swing-arm bracket. 2.2.1 Desktop Stand The panel-mount bracket is attached to the rear of the FPM-3150 to become a desktop stand. -
Page 22: Swing-Arm (Vesa Compliant)
FPM-3150 has been designed with support for the VESA Arm standard. Refer to figure 2.5. Detach the mounting brackets on the rear side, and attach the FPM-3150 onto the VESA ARM Mount. Figure 2.5: Swing-ARM for FPM-3150 Series FPM-3150 Series User Manual... - Page 23 Touchscreen This appendix contains information on the touchscreen, its installation and configuration.
-
Page 24: Appendix A Touchscreen
Appendix A Touchscreen A.1 Introduction The FPM-3150 Series’ optional touchscreen uses advanced 8-wire resis- tive technology. It provides more accurate sensing capacity than other technologies. The touchscreen is specially designed for tough industrial environments, and has been approved to FCC Class B standards. -
Page 25: Installing Driver For Windows 2000/Xp
Optical • Visible light transmission: 75% typical (>74% @ 550 nm test) • Clarity: Clear Finish - 25%, Antiglare Finish - 15% Sensor board • Chemical strengthened glass with 4 H hardness standard. (Test condition: ASTM D3363-92A) Ball drop test •... - Page 26 Follow the steps below to install the PenMount Windows 2000/XP driver. When the system first detects the controller board, a screen appears that shows “Unknown Device.” Do not use this hardware wizard. Press Cancel. FPM-3150 Series User Manual...
- Page 27 Insert the PenMount Driver CD-ROM. Go to the Windows 2000- XP Driver folder. Click setup.exe. The screen displays the installation wizard for the PenMount soft- ware. Click “Next”. Appendix A...
- Page 28 A License Agreement appears. Click “I accept…” and “Next” The “Ready to Install the Program” screen appears. Select “Install.” FPM-3150 Series User Manual...
- Page 29 The next screen is “Hardware Installation.” Select “Continue Any- way.” The “InstallShield Wizard Completed” appears. Click “Finish.” Appendix A...
-
Page 30: Configuring Penmount Windows 2000/Xp Driver
Advanced Calibration uses 4, 9, 16 or 25 points to effec- Calibration tively calibrate touch panel linearity of aged touch screens. Click this button and touch the red squares in sequence with a stylus. To skip, press ‘ESC’. FPM-3150 Series User Manual... - Page 31 NOTE: The older the touch screen, the more Advanced Mode calibration points you need for an accurate calibration. Use a stylus during Advanced Calibration for greater accuracy. Appendix A...
- Page 32 FPM-3150 Series User Manual...
- Page 33 Plot Calibra- Check this function and a touch panel linearity com- tion Data parison graph appears when you have finished Advanced Calibration. The blue lines show linearity before calibration and black lines show linearity after calibration. Appendix A...
- Page 34 Touch the screen with your finger or a stylus and the drawing screen reg- isters touch activity such left, right, up, down, pen up, and pen down. Click Clear Screen to clear the drawing. FPM-3150 Series User Manual...
- Page 35 Multiple Monitors Multiple Monitors supports from two to six touch screen displays for one system. The PenMount drivers for Windows 2000/XP support Multiple Monitors. This function supports from two to six touch screen displays for one system. Each monitor requires its own PenMount touch screen control board, either installed inside the display or in a central unit.
- Page 36 When the mapping screen message appears, click OK. Touch each screen as it displays “Please touch this monitor.” Fol- lowing this sequence and touching each screen is called mapping the touch screens. FPM-3150 Series User Manual...
- Page 37 Touching all screens completes the mapping and the desktop reap- pears on the monitors. Select a display and execute the ‘Calibration’ function. A message to start calibration appears. Click OK. “Touch this screen to start its calibration” appears on one of the screens.
- Page 38 Beep on Pen Up – beep occurs when pen is lifted up Beep on both of Pen Down/Up – beep occurs on both Beep Frequency – modifies sound frequency Beep Duration – modifies sound duration FPM-3150 Series User Manual...
- Page 39 About This panel displays information about the PenMount controller and driver version. Appendix A...
-
Page 40: Penmount Monitor Menu Icon
Right and Left Button functions. Pen Sta- Check this function to reduce cursor vibration for relatively bilizer unstable touch screens, or where there may be excess vibration. Normally this function is not checked. Exit Exits the PenMount Monitor function. FPM-3150 Series User Manual... -
Page 41: Penmount Rotating Functions
A.4.3 PenMount Rotating Functions The PenMount driver for Windows 2000/XP supports several display rotating software packages. Please see Chapter 5 for more information. The PenMount drivers for Windows 95, Windows 98/Me, Windows 2000/XP, as well as Windows 98 USB and Windows Me/2000/XP sup- port display rotating software packages such as: •... -
Page 42: Uninstall The Penmount Windows 2000/Xp Driver
Go to Settings, then Control Panel, and then click Add/Remove program. Select PenMount DMC9000 and click the Add/Remove button. Select PenMount DMC9000 and DMC9100. Click the Remove button. Select ‘Yes’ and “Close” to remove the PenMount Windows 2000/ XP driver, and reboot the system. FPM-3150 Series User Manual... - Page 43 Standard Timing Set Serial Data for Expansion...
-
Page 44: Appendix B Std. Timing Set Serial Data For Expansion
Note 3: Because adjustments may not fit, such as differing magnifying ratios or, in the case that you use it except for the display timing that was pre- set. FPM-3150 Series User Manual... - Page 45 • OSD Selection • Keypad Interface • OSD Function...
-
Page 46: Appendix C Osd
The keypad interface provides a driver for a dual color LED to indicate status. (1) Green: COMMON board detects a input signal and sends output sig- nal to LCD panel. (2) Orange: No signal detected, or out of range. (3) No color: Power off FPM-3150 Series User Manual... -
Page 47: Osd Function
C.3 OSD Function Each selected value is stored into LCD memory after SEL signal input or time out. The stored values are not affected if the power is turned off. But the selected value is not available in case a selected mode is changed before time out or power is turned off before time out. - Page 48 FPM-3150 Series User Manual...
Need help?
Do you have a question about the FPM-3150 Series and is the answer not in the manual?
Questions and answers