Supported Input Timing Modes - Advantech FPM-3120TV Series User Manual

Appendix A Display Timing Mode and
OSD
A.1 Supported Input Timing Modes
The nineteen kinds of timings below are already programmed in this
module. The input synchronous signals are automatically recognized.
Resloution
640 x 480
800 x 600
Note 1:
Note 2:
Note 3:
60 Hz
Yes
Yes
Table A.1: Supported Input Formats
Even if the preset timing is entered, a little adjust-
ment of the functions such as Horizontal period,
CLK-delay and display position, are required. The
adjusted values are memorized in every preset num-
ber.
This module recognizes the synchronous signals
with near preset timing of the frequency of the HS
and Vsync, even in the case that the signals other
than the preset timing that were entered.
Because adjustments may not fit, such as differing
magnifying ratios or, in the case that you use it
except for the display timing that was preset.
Vertical Frequencies
70 Hz 72 Hz
Yes
Appendix B Standard Timing 15
75 Hz
Yes
Yes