Supported Input Timing Modes - Advantech FPM-2150G Series User Manual

Flat panel monitor with 15" color tft/lcd display

Hide thumbs Also See for FPM-2150G Series:

Table of Contents

A.1 Supported Input Timing Modes

The nineteen kinds of timings below are already programmed in this

module. The input synchronous signals are automatically recognized.

Resolution

640 x 480

800 x 600

1024 x 768

Note 1: Even if the preset timing is entered, a little adjust-ment of the

functions such as Horizontal period, CLK-delay and display

position, are required. The adjusted values are memorized in

every preset num-ber.

Note 2: This module recognizes the synchronous signals with near

preset timing of the frequency of the HS and Vsync, even in

the case that the signals other than the preset timing that

were entered.

Note 3: Because adjustments may not fit, such as differing magnifying

ratios or, in the case that you use it except for the display

timing that was preset.

Table A.1: Supported Input Formats

56 Hz

60 Hz

Yes

Appendix A Display Timing Mode and OSD

Vertical Frequencies

70 Hz

Yes

72 Hz

75 Hz

Yes

Table of Contents