Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Advantech FPM-3120TH Series
Summary of Contents for Advantech FPM-3120TH Series
- Page 1 FPM-3120TH Series Flat Panel Monitor with 12" Color TFT/LCD Display User's Manual...
-
Page 2: Copyright Notice
Copyright Notice This document is copyrighted by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements to the products described in this manual at any time. Specifications are thus subject to change without notice. - Page 3 FCC Class B This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a residential environment.
-
Page 4: Packing List
If any of these items are missing or damaged, contact your distributor or sales representative immediately. Additional Information and Assistance 1. Visit the Advantech web site at www.advantech.com where you can find the latest information about the product. 2. Contact your distributor, sales representative, or Advantech's customer service center for technical support if you need additional assistance. -
Page 5: Safety Instructions
The sound pressure level at the operator's position according to IEC 704-1:1982 is no more than 70dB(A). DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein. -
Page 6: Wichtige Sicherheishinweise
- Wenn das Gerät deutliche Anzeichen eines Defektes aufweist. Der arbeitsplatzbezogene Schalldruckpegel nach DIN 45 635 Teil 1000 beträgt 70dB(A) oder weiger. DISCLAIMER: This set of instructions is given according to IEC704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein. FPM-3120TH User's Manual... - Page 7 Introduction This chapter includes: • Introduction • Specifications • LCD Specification • Power Consumption • Connectors • Dimensions...
- Page 8 1.1 Introduction Advantech's FPM-3120TH Series is a 12" color TFT LCD flat panel monitor built specifically for industrial applications. With the optional touchscreen, the FPM-3120TH Series is an excellent and user-friendly system control interface. In addition to its usual application as an LCD panel monitor, the FPM-3120TH comes standard with direct VGA control signal input making it compatible with Industrial PCs and Workstations.
-
Page 9: Specifications
1.2 Specifications General • Construction: Heavy-duty steel chassis • Front panel: Al-Mg, NEMA4/IP65 compliant • Control: OSD (On Screen Display) control pad on rear side • Mounting: Panel, wallmount, desktop or VESA Arm • Dimensions (W x H x D): 311 x 237 x 45 mm (12.2" x 9.3" x 1.77") •... -
Page 10: Lcd Specification
1.3 LCD Specification • Display type: SVGA TFT LCD • Display size: 12.1" • Max. colors: 262 K • Max. resolution: 800 x 600 • View angle: 90 ° (H), 40 ° (V) • Luminance: 300 cd/m • Storage temperature: -20 ~ 60 ° C (-4 ° ~ 140 ° F) •... -
Page 11: Vga Port (Db-15)
1.5 Connectors The following connectors are situated on the buttom of the FPM-3120 Series: VGA Port (DB-15) This DB-15 connector can be connected to the system via the external 15-pin DB-15 connector locatd on the left side of the system unit. Keyboard &... - Page 12 1.5.1 PS/2 connectors The FPM-3120TH provides two PS/2 connectors in the buttom side. Please follow the steps to connect the keyboard /mouse cable. 1. Connect 1.8m keyboard/mouse cable to one of the PS/2 port. 2. Connect other side of Keyboard/mouse 1.8m cable to PC 3.
- Page 13 1.6 Dimensions Figure 1-6: Dimensions Chapter 1 Introduction...
- Page 14 FPM-3120TH User's Manual...
-
Page 15: System Setup
System Setup • Mounting the Monitor - Wall/Panel mounting - Desktop Stand/Swing-ARM Mounting... -
Page 16: Mounting The Monitor
2.1 Mounting the Monitor The FPM-3120 Series can be placed as you require. The versatility of the FPM-3120 mounts enable it to be mounted on your desk or anywhere else. 2.1.1 Wall Mounting Please follow the steps to install FPM-3120TH in the wall. 1. -
Page 17: Panel Mounting
2.1.2 Panel Mounting If you need to install the FPM-3120 series on a panel mount, please release the mounting brackets by detaching screws on rear side and fix them on up and bottom side by screws. Figure 2-2: Panel Mounting (cut out dimension: 303mm x 229mm) Chapter 2 System Setup... -
Page 18: Desktop Stand
2.2 Desktop, Swing-ARM for FPM-3120TH The FPM-3120 Series can be mounted in other ways. You can place the desktop stand for desktop use or attach it on a swing-arm bracket. 2.2.1 Desktop Stand The desktop stand bracket is attached to the rear of the FPM-3120. Simply detach the small bracket at the rear side of the monitor by screwing the two screws. - Page 19 2.2.2 Swing-ARM Detach the mounting brackets on the rear side, then attach the FPM- 3120 series onto the Swing-ARM mount. Figure 2.5: Swing-ARM for the FPM-3120 series Chapter 2 System Setup...
-
Page 20: Power Adapter
2.2.3 Power adapter The power adapter bracket is attached to the rear of the FPM-3120. Simply detach the small bracket at the rear side of the monitor by screwing the four screws. FPM-3120THE User's Manual... - Page 21 Note: If you find that the brightness of LCD is dark, please follow the steps to adjust it. 1. Find the OSD in the rear side of FPM-3120TH 2. Press two buttons, " " & " " , at the same time. 3.
- Page 22 FPM-3120THE User's Manual...
- Page 23 Standard Timing Set Serial Data for Expansion...
-
Page 24: Supported Input Timing Modes
Appendix A Display Timing Mode and A.1 Supported Input Timing Modes The nineteen kinds of timings below are already programmed in this module. The input synchronous signals are automatically recognized. Resloution Vertical Frequencies 60 Hz 70 Hz 72 Hz 75 Hz 640 x 480 800 x 600 Table A.1: Supported Input Formats... - Page 25 • OSD Selection • Keypad Interface • OSD Function...
-
Page 26: Keypad Interface
B.1 Keypad Interface The keypad interface provides driver for a dual color LED for status indication. AUTO Press this button to execute auto adjustment process. Presses to show the OSD screen or select an item for changing its setting. To move between items or increase item setting. EXIT To close the selected item or the whole OSD screen. -
Page 27: Osd Function
B.2 OSD Function Each selected value is stored into LCD memory after SEL signal input or time out. The stored values are not affected if the power is turned off. But the selected value is not available in case a selected mode is changed before time out or power is turned off before time out. - Page 28 FPM-3120TH User's Manual...