Table of Contents
Advertisement
A.2.5 Chemical Resistance
The touch screen surface finish is unaffected by exposure to the following
chemicals for a period of one hour at 22..C, 45% relative humidity.
• ASTM-F-1598-95.
• Tea, Coffee, Ketchup, Mustard, Vinegar, Beer, Coca-Cola, Red Wine,
Cooking Oil, Wisk Laundry Detergent, Fantastik All Purpose Cleaner,
Joy Dishwashing Liquid, Windex, Formula 409 Cleaner, Clorox
Bleach (5.25%), Hydrogen Peroxide (3%), Lysol, Ethyl Alcohol, Iso-
propyl Alcohol Accetone, Methyl Ethyl Ketone (MEK), Toluene, Con-
centrated Hydrochloric Acid, Naptha, Mineral Spirits, Gasoline,
10W30 Motor Oil, Diesel Fuel, Transmission Fluid, Brake Fluid, Anti-
freeze, Hydraulic Oil.
A.3 Installation of Touchscreen Driver
The touchscreen in the FPM-3170 Series provides drivers for use with
Windows 2000 and XP. For a detailed touchscreen drivers installation
procedure, please refer to the folder:
\Touch-Screen-DRV\Penmount 9000(resistive)
Note 1:
Before installing the Windows 2000/XP driver software, you must have
the Windows 2000/XP system installed and running on your computer.
You must also have one of the following PenMount Serial Interface con-
troller boards installed: 90A4, 9026B, 9036 or 9084. Contents of the Pen-
Mount Windows 2000/XP driver folder are listed below.
DMC9000.inf
DMC9000.sys
DMC9000.cat
SETUP.EXE
The following windows illustrations are examples
only. You must follow the flow chart instructions
and pay attention to the instructions which then
appear on your screen.
15
Appendix A Driver Installation
Advertisement
Table of Contents
