Supported Input Timing Modes - Advantech VOP-1150TV Series User Manual

A.1 Supported Input Timing Modes
The nineteen kinds of timings below are already programmed in this
module. The input synchronous signals are automatically recognized.
Resolution
640 x 480
800 x 600
1024 x 768
Note 1: Even if the preset timing is entered, a little adjust-ment of the
functions such as Horizontal period, CLK-delay and display
position, are required. The adjusted values are memorized in
every preset num-ber.
Note 2: This module recognizes the synchronous signals with near
preset timing of the frequency of the HS and Vsync, even in
the case that the signals other than the preset timing that
were entered.
Note 3: Because adjustments may not fit, such as differing magnifying
ratios or, in the case that you use it except for the display
timing that was preset.
Table A.1: Supported Input Formats
56 Hz 60 Hz
Yes
Yes Yes
Yes
Appendix A Display Timing Mode and OSD
Vertical Frequencies
70 Hz
Yes
72 Hz 75 Hz
Yes Yes
Yes Yes
Yes
15