Disabling The Isa Ethernet Adapter; Advanced Diagnostics - IBM ISA Installation And Testing Instructions

Disabling the ISA Ethernet Adapter
The ISA Ethernet Adapter must be disabled before it can be moved
from one configuration to another.
To disable the ISA Ethernet Adapter, work through the following
steps.
1
Disconnect the ISA Ethernet Adapter from the Ethernet
network.
2
Turn off your computer.
3
Follow the instructions found in "Changing a Configuration"
on page 27, selecting the Display/Change Adapter
Configuration option.
4
Using the arrow keys to select the parameter and the TAB
key to select the value for that parameter, change the 110
Base Address and the Interrupt Assignment to have a value
of DISABLED.
5
Save the changes and exit the configuration program.
The ISA Ethernet Adapter is now in disabled mode.
Once the ISA Ethernet Adapter is disabled, you must turn off your
computer to remove the card. The disable procedure will not work
again until you turn off your computer.
Advanced Diagnostics
The Advanced Diagnostics feature allows you to execute a data
transfer test between two ISA Ethernet Adapters in different
computers.
In addition, you can use the computer with an IBM LAN Adapter for
Ethernet which is connected to a network to monitor packets on
the network.
Appendix A. Advanced Functions
43