IBM ISA Installation And Testing Instructions page 37

C Advanced Configuration Options
If you want to include any of the advanced configuration
options in your configuration, refer to the list of
parameters shown in the chart on page Figure 2 on
page 24 for a description of each parameter. Perform
the following steps; otherwise, go to "Running Adapter
Diagnostics" on page 25.
1
On the MAIN MENU, select Display/Change
Configuration and press Enter.
2
On the SELECT ADAPTER I/O PORT ADDRESS
menu, press Enter.
3
On the DISPLAY/CHANGE ADAPTER
CONFIGURATION menu, select Advanced
Configuration Options., and press Enter.
4
On the ADVANCED CONFIGURATION OPTIONS
menu, select the parameter(s) from those listed in
the chart on page Figure 2 on page 24.
The IBM ISA Ethernet Adapters
23