Installing Dos Ndis Device Drivers - IBM ISA Installation And Testing Instructions

Use an OSI2 copy command to copy the driver into the directory
on your workstation that contains the network operating system
software. (See the following examples).
1
For shared memory:
COPY A:\NOVELL\OS2\IBMENIOS.OS2 C:\NETWARE
2
For programmed
liD:
COPY A:\NOVELL\OS2\IBMENIOP.OS2 C:\NETWARE
Edit the CONFIG.SYS file on your workstation to add one of the
following statements. (The statement you will choose to add is
dependent on the architecture you selected during configuration):
1
For shared memory:
DEVICE=IBMENIOS.OS2
2
For Programmed
liD
or
liD
Port:
DEVICE=IBMNEIOP.OS2
Refer to the sample NET.CFG file shipped on the option diskette for
information regarding Custom Keywords.
For additional information, refer to the NetWare Requester for OS/2
manual or the NetWare Requester for OS/2 Version 2.0 manual.
Installing DOS NDIS Device Drivers
The DOS NDIS Device Driver is needed to run in an IBM DOS
workstation environment or an IBM DOS Server environment. The
option diskette contains the DOS NDIS Device Driver under the
name
IBMENLDOS.
If you are using the LAN Support Program, you can use the LAN
Support Program's device driver installation tool, DXMAID, to
install the DOS NDIS Device Driver. Refer to the Local Area
Network Support Program User's Guide for instructions on using
DXMAID.
The IBM ISA Ethernet Adapters
31