IBM ISA Installation And Testing Instructions page 49

If no change to the configuration is necessary, go to step 6
on page 35.
2
Select the option that allows you to Display/Change the
config u ration.
3
Use the arrow keys to select the parameter you want to
change and use the TAB key to select the different choices
for that parameter.
4
Once you have changed the necessary parameters, select
the option that allows you to save the configuration.
5
Turn off your computer, wait several seconds, and turn it
back on.
6
Run the Diagnostics as instructed in "Running Adapter
Diagnostics" on page 25 once more.
Note: The only time that the Shared Memory Address can
be changed is while Running Adapter Diagnostics.
7
If all tests return
OK,
the adapter is ready for use.
If the same tests fail again, call your customer service
center.
The IBM ISA Ethernet Adapters
35