Installing Netware Version 2.2 Server Device Drivers; Installing Netware Version 3.11 Odi Server Drivers - IBM ISA Installation And Testing Instructions

Installing NetWare Version 2.2 Server Device Drivers
The NetWare Version 2.2 Server Device Driver is needed to run in
a NetWare Version 2.2 Server environment. The option diskette
contains the NetWare Version 2.2 Server Device Driver you will
need in the \NOVELL\NETWARE\286SERV directory.
The following list contains the device drivers needed to run the ISA
Ethernet Adapters in a NetWare Version 2.2 Server environment.
Refer to the NetWare Version 2.2 InstaJling and Maintaining the
NetWork manual to determine which device driver you will need
for your environment.
• ANE200A 1.0BJ
• ANE200A2.0BJ
• BNE200A1.0BJ
.• BNE200A2.0BJ
• CNE200A1.0BJ
• CNE200A2.0BJ
• DNE200A1.0BJ
• DNE200A2.0BJ
To install the NetWare Version 2.2 Server Device Driver. follow the
instructions in Chapter 1. "Installation" of the NetWare Version 2.2
Installing and Maintaining the NetWork manual. For step 7 (7a ­
7c). follow the instructions for inserting the diskette and selecting
the correct driver.
Installing NetWare Version 3.11 001 Server Drivers
The NetWare Version 3.11 001 Server Driver is needed to run in a
NetWare Version 3.11 ODI Server environment. The option diskette
contains the NetWare Version 3.11 ODI Server Driver under the
name IBMENIO.LAN in the \NOVELL\NETWARE\386SERV directory.
To install the NetWare Version 3.11 ODI Server Driver. follow the
instructions in Chapter 3, "File Server Installation" from the
NetWare Version 3.11 Installation manual. To complete step 2 of
the "Load LAN drivers and other loadable modules" section. insert
the option diskette and enter the following command:
LOAD A:\NOVELL\NETWARE\386SERV\IBMENIO.LAN
The IBM ISA Ethernet Adapters
29