IBM ISA Installation And Testing Instructions page 33

4
Once all of the configurtion parameters have been
set to the desired values, copy the information in
the window onto the chart on page 25.
Select the Save Configuration option and press
Enter.
5
From the CONFIGURE NEW ADAPTER window,
select Return to previous menu. and press Enter.
6
Continue with "Running Adapter Diagnostics" on
page 25.
Note: When you select the option to save the
configuration, all configuration parameters are
automatically saved to the adapter's memory and
copied into a text file, CONFIG.TXT, on the option
diskette. In cases where the Option Diskette is write
protected, all configuration parameters will still be
saved to the adapter's memory.
The IBM ISA Ethernet Adapters
19