Drain Plug Check; Lubrication Points; Throttle Cable And Choke Cable Lubrication; Nozzle Pivot Shaft And Steering Cable Lubrication - Yamaha WaveRunner VX 700 Service Manual

TIP:
Remove the bilge strainer case 1 by pushing
the hooks on the bilge strainer inward.
3. Install the bilge strainer case 1.

Drain plug check

1. Check the O-ring of each drain plug.
Replace if cracked or damaged. See
"Drain plug check" (8-29).

Lubrication points

Throttle cable and choke cable lubrication

1. Lubricate the throttle cable (handlebar
end).
Recommended lubricant: Rust inhibitor
TIP:
Before lubricating the throttle cable, squeeze
the throttle lever, and then remove the rubber
seal 1.
2. Lubricate the throttle cable (carburetor
end).
3. Lubricate the choke cable (carburetor
end).
Recommended lubricant:
Yamaha grease A
Nozzle pivot shaft and steering cable
lubrication
1. Lubricate the nozzle pivot shaft and
steering cable.
Recommended lubricant:
Yamaha grease A
Steering cable and steering cable joint
lubrication
1. Lubricate the steering cable and steering
cable joint.
Periodic service
1
2
3
4
5
6
7
8
9
A
3-10