3. Replace the fuel level sensor if out of
specification.
A
Float position
A
B
4. Replace the multifunction meter if the
fuel level sensor resistance is within
specification.
Engine overheat warning indicator
1. Check the thermoswitch if engine over-
heat warning indicator does not come on.
See "Thermoswitch" (7-8).
2. Start the engine.
3. Disconnect the thermoswitch connectors
1, and then connect the jumper lead to
the disconnected connector.
P
B
4. Check that the "WARNING" indicator
light and the engine overheat warning
indicator blink, and the buzzer begins to
sound intermittently.
B
Resistance (Ω)
757.0–803.0
0–8
1
Buzzer
1. Connect the positive battery lead to the
terminal 1 and the negative battery lead
to the terminal 2.
2. Check that the buzzer sounds. Replace
the buzzer if does not sound.
2
B
Indication system
1 R
7-16
1
2
3
4
5
6
7
8
9
A