Yamaha WaveRunner VX 700 Service Manual page 74

POWR
C
D
11. Remove the band E, and then discon-
nect the fuel hose F.
TIP:
When removing the fuel hose, remove the
fuel filler cap to reduce any pressure inside
the fuel tank.
12. Remove the band G, and then discon-
nect the fuel hose H.
13. Remove the fuel hose H from the plastic
ties I.
14. Disconnect the throttle cable J and
choke cable K.
5-5
Power unit
E
F
I
H
G
K
15. Remove the coupling cover L.
L
16. Loosen the engine mounting bolts M.
17. Lift the engine unit slightly, remove the
shims N, and then lower the unit.
TIP:
Make a note of the position of each removed
shim so that it can be installed in its original
position.
18. Remove the engine mounting bolts M
and washer O.
J
M
O
N