Jet pump unit removal
Make sure to remove the battery before
removing the jet pump unit.
1. Remove the jet pump unit 1.
a
2
È
É
2
1
a
È STBD
É PORT
TIP:
Insert a flat-head screwdriver into the gaps a
between the jet pump unit 1 and the tran-
som plate 2 to separate them.
Jet pump unit installation
Make sure to remove the battery before
installing the jet pump unit.
1. Clean the mating surfaces of the jet
pump unit 1 and transom plate 2.
2. Apply sealant to the mating surfaces of
the jet pump unit 1 and transom plate
2.
1
2
1
a
2
3. Install the jet pump unit 1, and then
tighten the bolts 3, 4, and 5 to the
specified torques.
Jet pump unit assy. bolt (M10 × 45 mm) 3:
40 N·m (4.0 kgf·m, 29.5 ft·lb)
Jet pump unit assy. bolt (M6 × 30 mm) 4:
8 N·m (0.8 kgf·m, 5.9 ft·lb)
Bracket bolt (M8 × 18 mm) 5:
17 N·m (1.7 kgf·m, 12.5 ft·lb)
Jet pump unit
1
6-4
1
2
3
4
5
6
7
8
9
A