Advertisement
4
Press E to finish setting.
The camera returns to standby mode.
5
Press the shutter release button to start shooting.
When [Start Interval] is set to [Now], the first picture is
taken.
Instant Review is displayed, and then the monitor turns off.
After the set number of pictures are taken, the camera
3
returns to normal movie recording mode.
48
Setting a File Format
Still Pictures
Set the file format for still pictures in the control panel or [Image
Capture Settings] of the A1 menu.
Aspect Ratio
y, x, w, v
File Format
JPEG, RAW, RAW+
JPEG Recorded Pixels
q, p, o
JPEG Quality
m, l, k
uCaution
• When [File Format] is set to [RAW] or [RAW+], some
functions are not available. [RAW] and [RAW+] cannot
be selected for some capture modes. (p.77)
tMemo
• When [File Format] is set to [RAW+], a JPEG image and
a RAW image with the same file number are saved
at the same time.
• By assigning [One Push File Format] to M, you can take
pictures with a different file format setting only when
the button is pressed. (p.69)
v/A1
Advertisement
