Adjusting Color Balance According To Lighting - White Balance - Pentax EI-200 Operating Manual

[EV Compensation] screen

Adjusting color balance according to lighting - White Balance

Adjust the color of photos according to lighting when taking pictures.
The whole picture can take on a green or red hue when taking photos under fluorescent light or
normal electric light bulbs. White balance adjusts the colour of pictures according to the lighting
when taking pictures.
The setting of White Balance will be effective until the power supply is turned off. Once after
the power supply is turned off, white balance adjustment will be set to Auto.
Auto
Automatically adjust white balance.
Daylight
Set to Daylight when taking photos under natural sunlight.
Tungsten
Set to Tungsten when taking photos of subjects lit up with normal or tungsten light bulbs or.
Fluorescent
Set to Fluorescent when taking photos of subjects lit up with florescent light.
Setting Exposure, White Balance And ISO Speed
4If the down arrow on the four-way controller is pressed,
the [EV Compensation] screen will be displayed in
highlighted text.
5Press the left soft key to select the soft menu [Edit].
The [EV Compensation] screen will be displayed.
2
[EV Compensation] setting
1Adjust exposure by pressing the left and right arrows
on the four-way controller.
The setting value for exposure will be displayed by
pressing the left arrow for the minus direction (darker),
and the right arrow for the plus direction (brighter).
2Press the right soft key to select the soft menu [Exit].
The selected exposure will be set, and the [Photo
Assist] menu will be displayed.
To restore to the initial settings from those just set,
press the left soft key to select the soft menu [Default].
3Select the soft menu [Exit] by pressing the right soft
key and capturing status screen will restored.
It is possible to take photos with the set exposure.
57